2018

124. Y. C. Wang, B. Y. Liu, X. A. Zhao, X. H. Zhang, Y. C. Miao, N. Yang, B. Yang, L. Q. Zhang, W. J. Kuang, J. Li, E. Ma and Z. W. Shan, Turning a native or corroded Mg alloy surface into an anti-corrosion coating in excited CO2, Nature Communications, 9 (2018)    Link

123. L. Yang, L.Y Sun, R. Zhang, Y. Xu, X. Ning, Y. Qin, L. N. Ramasubramanian, J. Li and Z.  W. Shan, Reduced expansion and improved full-cell cycling of a SnOx#C embedded structure for lithium-ion battery, J. Mater. Chem. A, 6, 15738-15746 (2018)    Link

122. L. Y. Sun, L. Yang, J. Li, R. L. Narayan, X. H. Ning, Superior full-cell cycling and rate performance achieved by carbon coated hollow Fe3O4 nanoellipsoids for lithium ion battery, Electrochimica Acta, 228, 71-81 (2018)    Link

121. M. Wang., I. J. Beyerlein., J. Zhang., W. Z. Han, Defect-interface interactions in irradiated Cu/Ag nanocomposites, Acta Materialia, 160, 211-223 (2018)    Link

120. W. Zhang and E. Ma, Phase-change memory: Single-element glass to record data, Nature Materials, 17, 654-655 (2018)    Link

119. I. Ronneberger,  W. Zhang and R. Mazzarello, Crystal growth of Ge2Sb2Te5 at high temperatures, MRS Communications, 8, 3,1018-1023 (2018)    Link

118. Y. Ren, G. S. Zhou, D. G. Li, A pre-passive state observed for the passive film formed on Alloy 625 in a hydrochloric acid solution, Applied Surface Science, 431, 197-201 (2018)    Link

117. L. F. Tuo, G. S. Zhou, Z. Q. Yu, B. Wang, J. Wei, J. J. Li, Extrusion process of 316LN L-shape stainless steel and manufacture process of ITER side correction coil boxFusion Engineering and Design, 135, 15-23 (2018)    Link

116. J. Zhang, L. Liao, J. X. Zhu, X. Wan, M. Xie, H. Zhang, M. Zhang, L. Lu, H. Yang, D. Jing, X. Liu, S. Yu, X. L. Lu, C. Chen, Z. Shan and M. Wang, Osteochondral Interface Stiffening in Mandibular Condylar Osteoarthritis, Journal of Dental Research, 97(5), 563–570 (2018)    Link

115. L. Ren, W. L. Xiao, W. Z. Han, C. L. Ma and L. Zhou, Influence of duplex ageing on secondary α precipitates and mechanical properties of the near β-Ti alloy Ti-55531, Materials Characterization, 144, 1-8 (2018)    Link

114. Y. Yang, A. Kushima, W. Z. Han, H. Xin and J. Li, Liquid-Like, self-healing aluminum oxide during deformation at room temperature, Nano Letters, 18, 2492-2497 (2018)    Link

113. B. Y. Liu, N. Yang, J. Wang, M. Barnett, Y. C. Xin, D. Wu, R. L. Xin, B. Li, R. L. Narayan, J. F. Nie, J. Li, E. Ma and Z. W. Shan, Insight from in situ microscopy into which precipitate morphology can enable high strength in magnesium alloys, Journal of Materials Science & Technology,  34, 1061–1066 (2018)    Link

112. J. J. Wang, J. Wang, H. Du, L. Lu, P. C. Schmitz, J. Reindl, A. M. Mio, C. Jia, E. Ma, R. Mazzarello, M. Wuttig and W. Zhang,  Genesis and effects of swapping bi-layers in hexagonal GeSb2Te4, Chemistry of Materials,  30 (14),  4770–4777 (2018)    Link

111. T. Dai, Y. Zhao, X. H. Ning, N. R. Lakshmi, J. Li and Z. W. Shan, Capacity extended bismuth-antimony cathode for high-performance liquid metal battery, Journal of Power Sources381, 38-45 (2018)   Link

110. J. J. Wang, I. Ronneberger,L. Zhou, L. Lu, V. L. Deringer, B. Y. Zhang,L. Tian, H. C. Du, C. L. Jia, X. F. Qian, M. Wuttig, R. Mazzarello, and W. Zhang, Unconventional two-dimensional germanium dichalcogenides, Nanoscale10, 7363-7368 (2018)   Link

109. L. Q. Zhang, Y. S. Tang, Q. M. Peng, T. T. Yang, Q. N. Liu, Y. C. Wang, Y. F. Li, C. C. Du, Y. Sun, L. S. Cui, F. Yang, T. D. Shen, Z. W. Shan  and J. Y. Huang, Ceramic nanowelding, Nature Communications9 (2018)   Link

108. W. Z. Han, M. S. Ding and Z. W. Shan, Cracking behavior of helium-irradiated small-volume copper, Scripta Materialia147, 1-5 (2018)    Link