School of Materials Science and Engineering, Xi'an Jiaotong University
28 West Xianning Road, Xi'an, Shaanxi 710049, P. R. China

  • Elastic Strain Engineering

When the dimension shrinks into micronano scale, solids can sustain up to 100 times higher elastic strain than their bulk counterparts, which provides us with new opportunities to engineer the performance of materials. We are aiming to design and synthesize high-quality nanocrystals, apply lattice strain in proper way, characterize and optimize its certain properties, from luminescence color/intensity to electrical conductance, from catalytic ability to phase transition point, and finally establish the general fundamental theory based on the experimental phenomena. 

  • Development and application of synchrotron X-ray diffraction

Synchrotron is a sort of rapidly developed light source in the last few decades. If we take the conventional laboratory X-ray or electron beam as a candle, synchrotron is like the sun. With this brilliant beam of light, people have a better chance to ‘see the unseen’ and ‘know the unknown’. Our interests is in the development and application of diffraction techniques based on synchrotron radiation. With these methods, we can reproduce the firing condition (temperature and oxygen content) of the Terracotta Warriors made in Qin Dynasty or a teaware made in Song Dynasty, predict the lifetime of your computer chips, measure the residual stress in a piece of corroded and cracked steel, and even explain how the rocks and minerals are deformed in a disastrous earthquake. 

    Ph.D in Electronic Materials, Department of Materials Science and Engineering
  • 2001 - 2005 PEKING UNIVERSITY, Beijing, P. R. China
    B.S. in Physical Chemistry, School of Chemistry and Molecular Engineering

  • Aug. 2011 - present
    Associate professor, School of Materials Science and Engineering, Xi'an Jiaotong University, Xi'an, Shaanxi, China
    Director assistant, The Center for Advancing Materials Performance from the Nanoscale (CAMP-Nano)
    Associate director, Hysitron Applied Research Center (China)
  • Sep. 2010 - Jul. 2011 
    Postdoc, National Center for Electron Microscopy, Lawrence Berkeley National Laboratory, Advised by Prof. A. M. Minor
  • Sep. 2009 - Jul. 2010 
    Postdoc, Department of Earth and Planetary Science, University of California Berkeley, Advised by Prof. H.-R. Wenk
  • Mar. 2007 - Aug. 2009 
    Visiting scholar, Advanced Light Source, Lawrence Berkeley National Laboratory, Hosted by Dr. Nobumichi Tamura
  1. Jae-Woong Nah, Kai Chen, K. N. Tu, Bor-Rung Su, and Chih Chen, Mechanism of electromigration induced failure in flip-chip solder joints with a 10um-thick Cu under-bump metallization, Journal of Materials Research, 22(3) 763-769, DOI: 10.1557/JMR.2007.0084, 2007
  2. Fan-Yi Ouyang, Kai Chen, K. N. Tu, and Yi-Shao Lai, Effect of current crowding on whisker growth at the anode in flip chip solder jointsApplied Physics Letters, 91, 231919, DOI: 10.1063/1.2822446, 2007
  3. Di Xu, Wei Lek Kwan, Kai Chen, Xi Zhang, Vidvuds Ozolins, and K. N. Tu, Nanotwin formation in copper thin films by stress/strain relaxation in pulse electrodeposition, Applied Physics Letters, 91, 254105, DOI: 10.1063/1.2825412, 2007
  4. Kai Chen*, N. Tamura, B. C. Valek and K. N. Tu, Plastic deformation in Al (Cu) interconnects stressed by electromigration and studied by synchrotron polychromatic X-ray microdiffractionJournal of Applied Physics, 104, 013513, DOI: 10.1063/1.2952073, 2008
  5. Kai Chen*, N. Tamura and K. N. Tu, In-situ early stage electromigration study in Al line using synchrotron polychromatic X-ray microdiffraction, Materials Research Society Symposium Proceedings, 1079E, N05-02, DOI: 10.1557/PROC-1079-N05-02, 2008
  6. Martin Kunz, Nobumichi Tamura, Kai Chen, Alastair A. MacDowell, Richard S. Celestre, Matthew M. Church, Sirine Fakra, Edward E. Domning, James M. Glossinger, Dave W. Plate, Brian V. Smith, Tony Warwick, Howard A. Padmore and Ersan Ustundag, A dedicated superbend x-ray microdiffraction beamline for material-, geo- and environmental sciences at the Advanced Light SourceReview of Scientific Instruments, 80, 035108, DOI: 10.1063/1.3096295, 2009
  7. Kai Chen*, Nobumichi Tamura, and K. N. Tu, In-situ study of electromigration-induced grain rotation in Pb-free solder joint by synchrotron microdiffractionMaterials Research Society Symposium Proceedings, 1116E, I05-06, DOI: 10.1557/PROC-1116-I05-06, 2009 
  8. Martin Kunz, Kai Chen, Nobumichi Tamura, and Hans-Rudolf Wenk, Evidence for residual elastic strain in deformed natural quartzAmerican Mineralogist, 94, 1059, DOI: 10.2138/am.2009.3216, 2009
  9. N. Tamura, M. Kunz, K. Chen, R. S. Celestre, A. A. MacDowell, and T. Warwick, A superbend X-ray microdiffraction beamline at the Advanced Light SourceMaterials Science and Engineering A, 524, 28, DOI: 10.1016/j.msea.2009.03.062, 2009
  10. Kai Chen*, N. Tamura, M. Kunz, K. N. Tu, and Yi-Shao Lai, In situ measurement of electromigration-induced transient stress in Pb-free Sn-Cu solder joints by synchrotron radiation based X-ray polychromatic microdiffraction, Journal of Applied Physics, 106, 023502, DOI: 10.1063/1.3157196, 2009
  11. Hans-Rudolf Wenk, Paulo J. M. Monteiro, Martin Kunz, Kai Chen, Nobumichi Tamura, Luca Lutterotti, and John Delacroz, Preferred orientation of ettringite in concrete fractures, Journal of Applied Crystallography, 42, 429, DOI: 10.1107/S0021889809015349, 2009
  12. J. Cao, Y. Gu, W. Fan, L. Q. Chen, D. F. Ogletree, K. Chen, N. Tamura, M. Kunz, C. Barrett, J. Seidel, and J. Wu, Extended Mapping and Exploration of the Vanadium Dioxide Stress-Temperature Phase Diagram, Nano Letters, 10, 2667, DOI: 10.1021/nl101457k, 2010
  13. J. Cao, W. Fan, K. Chen, N. Tamura, M. Kunz, V. Eyert, and J. Wu, Constant threshold resistivity in the metal-insulator transition of VO2Physical Review B, 82, 241101, DOI: 10.1103/PhysRevB.82.241101, 2010
  14. Kai Chen, N. Tamura, Wei Tang, M. Kunz, Yi-Chia Chou, K. N. Tu, and Yi-Shao Lai, High precision thermal stress study on flip chips by synchrotron polychromatic X-ray microdiffractionJournal of Applied Physics, 107, 063502, DOI: 10.1063/1.3309750, 2010
  15. Gyuhyon Lee, Ju-Young Kim, Arief Suriadi Budiman, Nobumichi Tamura, Martin Kunz, Kai Chen, Michael J. Burek, Julia R. Greer, and Ting Y, Tsui Fabrication, Structure, and Mechanical Properties of Indium NanopillarsActa Materialia, 58, 1361, DOI: 10.1016/j.actamat.2009.10.042, 2010
  16. Alexandra Friedrich, Björn Winkler, Lkhamsuren Bayarjargal, Wolfgang H. Morgenroth, Erick A. Juarez-Arellano, Victor Milman, Keith Refson, Martin Kunz, and Kai ChenNovel nitrides of rhenium, Physical Review Letters, 105, 085504, DOI: 10.1103/PhysRevLett.105.085504, 2010
  17. Jun Liu, Martin Kunz, Kai Chen, Nobumichi Tamura, and Thomas J. Richardson, Visualization of charge distribution in a Lithium battery electrode, The Journal of Physical Chemistry Letters, 1(14), 2120, DOI: 10.1021/jz100634n, 2010
  18. Kai Chen, Martin Kunz, Nobumichi Tamura, and Hans-Rudolf Wenk, Evidence for high stress in quartz from the impact site of Vredefort, South Africa European Journal of Mineralogy, 23(2), 169-178, DOI: 10.1127/0935-1221/2011/0023-2082, 2011
  19. Bongjin Simon Mun, Kai Chen, Youngchul Leem, Catherine Dejoie, Nobumichi Tamura, Martin Kunz, Zhi Liu, Michael Grass, Changwoo Park, and Honglyoul Ju, Unusual structural transitions in macro-sized VO2 single crystalsPhysics Stats Solidi (RRL), 5(3), 107-109, DOI: 10.1002/pssr.201105011, 2011
  20. Kai Chen, Martin Kunz, Nobumichi Tamura, and Hans-Rudolf Wenk, Deformation twinning and residual stress in calcite studied using synchrotron polychromatic x-ray microdiffractionPhysics and Chemistry of Minerals, 38(6), 491-500, DOI: 10.1007/s00269-011-0422-7, 2011
  21. Catherine Dejoie, Martin Kunz, Nobumichi Tamura, Colin Bousige, Kai Chen, Simon Teat, Christine Beavers, and Christian Baerlocher, Determining the effective white beam flux curve of a synchrotron beamline using Laue patternsJournal of Applied Crystallography, 44, 177-183, DOI: 10.1107/S0021889810052015, 2011
  22. E. Rybacki, C. Janssen , R. Wirth, K. Chen, H. R. Wenk, D. Stromeyer, and G. Dresen, Low-temperature deformation in calcite veins of SAFOD core samples (San Andreas Fault) - microstructural analysis and implications for fault rheologyTectonophysics, 509, 107-119, DOI: 10.1016/j.tecto.2011.05.014, 2011
  23. Hua Guo#, Kai Chen#, J. Oh, S. A. Syed Asif, O. L. Warren, Z. Shan, Kevin Wang, J. Wu, and A. M. Minor (# joint first author), Mechanics and Dynamics of the Strain-Induced M1-M2 Structural Phase Transition in Individual VO2 NanowiresNano Letters, 11, 3207-3213, DOI: 10.1021/nl201460v, 2011
  24. Hans-Rudolf Wenk, Kai Chen, and Rebecca Smith, Morphology and microstructure of magnetite and ilmenite inclusions in plagioclase from Adirondack anorthositic gneissAmerican Mineralogist, 96, 1316-1324, DOI: 10.2138/am.2011.3760, 2011
  25. A. S. Budiman, N. Li, Q. Wei, J. K. Baldwin, J. Xiong, H. Luo, D. Trugman, Q. X. Jia, N. Tamura, M. Kunz, K. Chen, and A. Misra, Growth and structural characterization of epitaxial Cu/Nb multilayersThin Solid Films, 519(13), 4137-4143, DOI: 10.1016/j.tsf.2010.12.077, 2011
  26. Tian Tian, Kai Chen, A. A. MacDowell, Dula Parkinson, Yi-Shao Lai, and K. N. Tu, Quantitative x-ray micro-tomography study of 3D void growth induced by electromigration in eutectic SnPb flip chip solder jointsScripta Materialia, 65, 646-649, DOI: 10.1016/j.scriptamat.2011.07.002, 2011
  27. Taiji Zhang, Yurong Ma, Kai Chen, Martin Kunz, Nobumichi Tamura, Jun Xu, and Limin Qi, Ultra-thin flexible armor in Nature: interlocked Helical aragonite Nanofibers in Cavolinia Uncinata Shell and Its Relationship with Mechanical PropertiesAngewandte Chemie International Edition, 50, 10361-10365, DOI: 10.1002/anie.201103407, 2011
  28. Bongjin Simon Mun, Kai Chen, Joonseok Yoon, Catherine Dejoie, Nobumichi Tamura, Martin Kunz, Zhi Liu, Michael E. Grass, Sung-Kwan Mo, Changwoo Park, Y. Yvette Lee, and Honglyoul Ju, Nonpercolative metal-insulator transition in VO2 single crystalsPhysical Review B, 84, 113109, DOI: 10.1103/PhysRevB.84.113109, 2011
  29. Qian Yu, Liang Qi, Kai Chen, Raja K. Mishra, Ju Li, and Andrew M. Minor, The Nanostructured Origin of Deformation Twinning, Nano Letters, 12, 887-892, DOI: 10.1021/nl203937t, 2012
  30. B. S. Mun, J. Yoon, S. K. Mo, K. Chen, N. Tamura, C. Dejoie, M. Kunz, Z. Liu, Y. Y. Lee, K. Moon, C. Park, and H. Ju, Metal insulator transition characteristics of macro-size single domain VO2 crystals, Phase Transitions: A Multinational Journal, DOI: 10.1080/01411594.2012.717291, 2012. 
  31. K. Chen*, C. Dejoie, and H. R. Wenk, Unambiguous indexing of trigonal crystals from white-beam Laue diffraction patterns: application to Dauphiné twinning and lattice stress mapping in deformed quartz, Journal of Applied Crystallography, 45, 982-989, DOI: 10.1107/S0021889812031287, 2012
  32. B.S. Mun, J. Yoon, S.K. Mo, K. Chen, N. Tamura, C. Dejoie, M. Kunz, Z. Liu, C. Park, K. Moon, and H. Ju, Role of joule heating effect and bulk-surface phases in voltage-driven metal-insulator transition in VO2 crystal, Applied Physics Letters, 103, 061902, DOI: 10.1063/1.4817727, 2013
  33. Xiaofei Sun, Youlong Xu, Mingrui Jia, Peng Ding, Yanghao Liu, and Kai Chen, High performance LiV0.96Mn0.04PO4F/C cathodes for lithium-ion batteries, Journal of Materials Chemistry A, 1(7), 2501-2507, DOI: 10.1039/c2ta01338j, 2013
  34. Catherine Dejoie, Philippe Sciau, Weidong Li, Laure Noe´, Apurva Mehta, Kai Chen, Hongjie Luo, Martin Kunz, Nobumichi Tamura, and Zhi Liu, Learning from the past: Rare e-Fe2O3 in the ancient black-glazed Jian (Tenmoku) wares, Scientific Reports, DOI: 10.1038/srep04941, 2014 
  35. A. Lupinacci, K. Chen*, Y. Li, M. Kunz, Z. Jiao, G.S. Was, M.D. Abad, A.M. Minor, and P. Hosemann* (* joint corresponding authors), Characterization of ion beam irradiated 304 stainless steel utilizing nanoindentation and Laue microdiffractionJournal of Nuclear Materials, 458, 70-76, DOI: 10.1016/j.jnucmat.2014.11.050, 2015
  36. Kai Chen, Martin Kunz, Nobumichi Tamura, and Hans-Rudolf Wenk, Residual stress preserved in quartz from the San Andreas Fault Observatory at Depth, Geology, 43(3), 219-222, DOI: 10.1130/G36443.1, 2015
  37. Yao Li, Liang Wan, and Kai Chen*, A look-up table based approach to characterize crystal twinning for synchrotron X-ray Laue microdiffraction scans, Journal of Applied Crystallography, 48, 747-757, DOI: 10.1107/S1600576715004896, 2015
  38. Yi-Chia Chou, Wei Tang, Chien-Jyun Chiou, Kai Chen, Andrew Minor, and King-Ning Tu, Effect of elastic strain fluctuation on atomic layer growth of epitaxial silicide in Si nanowires by point contact reactions, Nano Letters, 15 (6), 4121-4128, DOI: 10.1021/acs.nanolett.5b01234, 2015
  39. Hongwei Cheng, Bin Leng, Kai Chen, Yanyan Jia, Jiasheng Dong, Zhijun Li, and Xingtai Zhou, EPMA and TEM characterization of intergranular tellurium corrosion of Ni–16Mo–7Cr–4Fe superalloy, Corrosion Science, 97, DOI: 10.1016/j.corsci.2015.04.017, 2015
  40. Liang Wan, Weizhong Han, and Kai Chen, Bi-crystallographic lattice structure directs grain boundary motion under shear stress, Scientific Reports, 5, 13441, DOI:10.1038/srep13441, 2015
  41. Jiawei Xue, Anfeng Zhang, Yao Li, Dan Qian, Jingchun Wan, Baolu Qi, Nobumichi Tamura, Zhongxiao Song, and Kai Chen*, A synchrotron study of microstructure gradient in laser additively formed epitaxial Ni-based superalloy, Scientific Reports, 5, 14903, DOI:10.1038/srep14903, 2015
  42. Eric Yue Ma, Yong-Tao Cui, Kentaro Ueda, Shujie Tang, Kai Chen, Nobumichi Tamura, Phillip M. Wu, Jun Fujioka, Yoshinori Tokura, and Zhi-Xun Shen, Mobile metallic domain walls in an all-in-all-out magnetic insulatorScience, 350, 6260, 538-541, DOI: 10.1126/science.aac8289, 2015
  43. Yao Li, Dan Qian, Jiawei Xue, Jingchun Wan, Anfeng Zhang, Nobumichi Tamura, Zhongxiao Song, and Kai Chen*, A synchrotron study of defect and strain inhomogeneity in laser-assisted three-dimensionally-printed Ni-based superalloy, Applied Physics Letters, 107, 181902, DOI: 10.1063/1.4934839, 2015
  44. Xiaoguang Wang, Kai Chen, Yongqiang Zhang, Jingchun Wan, Oden L. Warren, Jason Oh, Ju Li, Evan Ma, and Zhiwei Shan, Growth Conditions Control the Elastic and Electrical Properties of ZnO Nanowires, Nano Letters, 15, 7886-7892, DOI: 10.1021/acs.nanolett.5b02852, 2015
  45. Hao Shen, Wenxin Zhu, Yao Li, Nobumichi Tamura, and Kai Chen*, In situ synchrotron study of electromigration induced grain rotations in Sn solder joints, Scientific Reports, 6, 24418, DOI: 10.1038/srep24418, 2016
  46. Klaus-Dieter Liss* and Kai Chen*, Frontiers of synchrotron research in materials science, MRS Bulletin, 41, 6, 435-441, DOI:10.1557/mrs.2016.112, 2016
  47. Guangni Zhou#, Wenxin Zhu#, (# contributed equally) Hao Shen, Yao Li, Anfeng Zhang, Nobumichi Tamura, and Kai Chen*, Real-time microstructure imaging by Laue microdiffraction: A sample application in laser 3D printed Ni-based superalloys, Scientific Reports, 6, 28144, DOI:10.1038/srep28144, 2016
  48. Kai Chen, Martin Kunz, Yao Li, Eloisa Zepeda-Alarcon, Manuel Sintubin, and Hans-Rudolf Wenk, Compressional residual stress in Bastogne boudins revealed by synchrotron X-ray microdiffraction, Geophysical Research Letters, 43, 6178-6185, doi:10.1002/2016GL069236, 2016
  49. Dan Qian, Anfeng Zhang, Jianxue Zhu, Yao Li, Wenxin Zhu, Baolu Qi, Nobumichi Tamura, Dichen Li, Zhongxiao Song, and Kai Chen*, Hardness and microstructural inhomogeneity at the epitaxial interface of laser 3D-printed Ni-based superalloy, Applied Physics Letters, 109, 101907, DOI: 10.1063/1.4962485, 2016 (APL Editor's Pick).
  50. 潘志豪, 周光妮, 陈凯*晶体材料微观结构的同步辐射白光劳厄微衍射研究, 中国材料进展, 2017(3):011-15.
  51. Dan Qian, Jiawei Xue, Anfeng Zhang, Yao Li, Nobumichi Tamura, Zhongxiao Song, and Kai Chen*, Statistical study of ductility dip cracking induced plastic deformation in polycrystalline laser 3D printed Ni-based superalloy, Scientific Reports, 7, 2859, DOI:10.1038/s41598-017-03051-x, 2017.
  52. Shuwen Zhang, Kaiyuan Liu, Minglong Xu*, Hao Shen, Kai Chen*, Bo Feng, and Shengping Shen, Investigation of the 2312 flexoelectric coefficient component of polyvinylidene fluoride: Deduction, simulation, and mensuration, Scientific Reports, 7, 3134, DOI:10.1038/s41598-017-03403-7, 2017.
  53. Lianhai Zu, Qingmei Su, Feng Zhu, Bingjie Chen, Huanhuan Lu, Chengxin Peng, Ting He, Gaohui Du, Pengfei He, Kai Chen, Shihe Yang, Jinhu Yang, Huisheng Peng, Antipulverization Electrode Based on Low-Carbon Triple-Shelled Superstructures for Lithium-Ion BatteriesAdvanced Materials, 29, 1701494, DOI:10.1002/adma.201701494, 2017.
  54. Tongtong Zhang, Guohua Fan*, Kesong Miao, Kai Chen*, Zhihao Pan, Shuai Chen, Xiping Cui, Meng Huang, Lin Geng, Bimodal laminated Ti3Al matrix composite achieved by in situformed Ti5Si3 reinforcementsMaterials Science and Engineering: A, 707, 419-425, DOI: 10.1016/j.msea.2017.09.074, 2017.
  55. Jiawei Kou, Kai Chen*, Nobumichi Tamura, A peak position comparison method for high-speed quantitative Laue microdiffraction data processingScripta Materialia, 143, 49-53, DOI:10.1016/j.scriptamat.2017.09.005, 2018.
  56. M.P. Popovic*, K. Chen*, H. Shen, C.V. Stan, D.L. Olmsted, N. Tamura, M. Asta, M.D. Abad, P. Hosemann, A study of deformation and strain induced in bulk by the oxide layers formation on a Fe-Cr-Al alloy in high-temperature liquid Pb-Bi eutectic, Acta Materialia, 151, 301-309, DOI: 10.1016/j.actamat.2018.03.041, 2018
  57. Sihai Luo, Weifeng He, Kai Chen, Xiangfan Nie, Liucheng Zhou, Yiming Li, Regain the fatigue strength of laser additive manufactured Ti alloy via laser shock peening, Journal of Alloys and Compounds, 750, 626–635, DOI: 10.1016/j.jallcom.2018.04.029, 2018.
  58. Yao Li, Kai Chen*, Nobumichi Tamura, Mechanism of heat affected zone cracking in Ni-based superalloy DZ125L fabricated by laser 3D printing technique, Materials and Design, 150, 171-181, DOI: 10.1016/j.matdes.2018.04.032, 2018. 
  59. Guangni Zhou, Jiawei Kou, Yao Li, Wenxin Zhu, Kai Chen*, Nobumichi Tamura*, Quantitative Scanning Laue Diffraction Microscopy: application to the study of 3D printed nickel-based superalloys, Quantum Beam Science, 2, 13, DOI: 10.3390/qubs2020013, 2018.
  • Feb 2010 Oral presentation at 2010 TMS Annual Meeting
    "High precision thermal stress study on flip chips by synchrotron polychromatic X-ray microdiffraction”
  • Oct 2009 Invited talk at 2009 ALS Workshop on X-ray diffraction / fluorescence microscopy
    "Introduction to the Microdiffraction Beamline (BL 12.3.2) at ALS” 
  • Oct 2009 Invited talk at 2009 ALS Workshop on Synchrotron Science at ALS
    "X-Ray Micro Diffraction” 
  • Apr 2009 Oral presentation at 2009 Materials Research Society (MRS) Spring Meeting
    "Synchrotron X-ray microdiffraction study of electromigration induced transient stress in Sn-Cu Pb-free solder joints”
  • Apr 2009 Poster presentation at 2009 Materials Research Society (MRS) Spring Meeting
    "A Dedicated Submicron X-ray Diffraction Beamline for Materials Science Study at the Advanced Light Source”
  • Feb 2009 Oral presentation at 2009 TMS Annual Meeting
    "Synchrotron X-ray microdiffraction study of electromigration induced transient stress in Sn-Cu Pb-free solder joints”
  • Feb 2009 Oral presentation at 2009 TMS Annual Meeting
    "EM-Induced Orientation Evolution in Pb-Free Solder Joint by Synchrotron Microdiffraction”
  • Dec 2008 Oral presentation at 2008 Materials Research Society (MRS) Fall Meeting
    "Synchrotron x-ray microdiffraction study of electromigration induced transient stress in Sn-Cu Pb-free solder joints”
  • Aug 2008 Oral presentation at the 57th Annual Conference on Applications of X-ray Analysis 
    "Synchrotron X–ray microdiffraction study of electromigration induced plastic deformation in Al interconnects” 
  • Aug 2008 Oral presentation at the 8th International Conference on Residual Stresses 
    "Synchrotron X-ray microdiffraction study of electromigration induced microstructure evolution in Sn-Cu Pb-free solder joints” 
  • Aug 2008 Poster presentation at the 8th International Conference on Residual Stresses 
    "EM-induced stress distribution in Al (Cu) interconnects studied by synchrotron X-ray microdiffraction” 
  • Jul 2008 Oral presentation at 2008 Semiconductor Research Corporation annual review meeting 
    "In situ EM study on flip chip solder joints” 
  • Mar 2008 Oral presentation at 2008 Materials Research Society (MRS) Spring Meeting
    "Synchrotron X–ray microdiffraction study of electromigration induced plastic deformation in Al (Cu) interconnects” 
  • Mar 2008 Poster presentation at Office of Basic Energy Sciences of Department of Energy (DOE) review for Advanced Light Source, Lawrence Berkeley National Laboratory
    "Tin whisker growth studied by polychromatic X-ray microdiffraction” 


  1. 单智伟, 陈凯, 万景春, 沈昊, 王晓光.  一种碳包覆铜纳米线的低温自焊接方法: 中国, ZL 2015 1 0246707.5. 2017-02-22.
  2. 陈凯,朱文欣,沈昊,周光妮,李尧. 一种晶体微观结构的同步辐射可视化表征方法:中国, ZL 2016 1 0177788.2. 2017-04-05.
  3. 陈凯, 沈昊, 王晓光, 张永强. 一种高普适性单轴滑杆式应变仪: 中国 ZL 2015 1 0567124.2. 2017-06-20.

Software Copyright 

  1. 陈凯, 李尧 . 同步辐射微束衍射实验数据处理软件[简称:XtalCAMP]V1.0: 中国, 软著登字第 1150418号, 2015SR263332. 2015-12-16.
  2. 陈凯, 李尧. 同步辐射微束衍射实验数据处理软件[简称:XtalCAMP]V2.0: 中国, 软著登字第 1239495号, 2016SR060878. 2016-03-23.
  3. 陈凯, 朱文欣. 劳厄衍射峰拉长模拟软件[简称:SPS]V1.0: 中国, 软著登字第1933552号, 2017SR348368. 2017-07-06.